Here we have the list Best Clamp Meter Brands in India .
If you are in hurry then you can check the below table to buy Best Clamp Meter Brands in India
Top Best Clamp Meter Brands
KAIWEETS HT208D Inrush Clamp Meter 1000A True RMS AC/DC Current Amp Meter, VFD, LOZ Mode, 6000 Counts, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle
- True-RMS Clamp Meter: This HT208D multimeter can accurately measure 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity and Temperature. Easy to use for labs factories and household.
- Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of inrush current is about 100ms.
- NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. Convenient LED flashlight illuminates a dimly lit area.
- Advanced Functions: The Clamp Meter has Variable Frequency Drive Filtering (VFD) and low Input Impedance (LoZ) modes, which can provide higher accuracy readings.
- Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service.
Metravi DT-725 TRMS AC/DC Digital Pocket Clamp Meter upto 600A with Auto Ranging, NCV & Flashlight
- 3-5/6 Digit, 6000 Count, Backlight LCD, Flashlight for accessing dark areas.
- T-RMS, Auto Ranging, NCV, Jaw Size 33mm. High Current Clamp Meter.
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF; Accuracy: ± (3.5%+20). Frequency: 0-10/100/1K/10K/100K/1M/10MHz; Accuracy: ± (0.1%+3). Temperature: -20°C to 1000°C; Accuracy: ± (1.0%+5). Diode & Continuity test.
- AC Voltage: 0-6/60/600/750V; Accuracy: ± (0.5%+3). DC Voltage: 0-6/60/600/1000V; Accuracy: ± (0.8%+3). AC Current: 0-60/600A; Accuracy: ± (2%+30).
- AC Current: 0-60/600A; Accuracy: ± (2%+30). DC Current: 0-60/600A. Resistance: 0-600/6K/60K/600K/6M/40M Ohms; Accuracy: ± (0.8%+3). NOT MEANT FOR LOW CURRENT MEASUREMENTS - PLEASE CHECK METRAVI LEAKAGE CURRENT CLAMPS FOR mA MEASUREMENTS.
Fluke 302+, 400A AC Clamp Meter
- Resistance range upto 4 k Ohm
- Easy to read backlight display
Meco 27-auto Digital Clamp Meter, Red
- Ac Current: 2a, 20a, 200a, 400a (Auto Ranging)
- Ac Voltage: 2v, 20v, 200v, 600v (Auto Ranging)
- Resistance: 200, 2k, 20k, 200k, 2m, 20m (Auto Ranging)
- Functions: Data Hold, Audible Continuity, Diode Test, Apo
- Jaw Opening: 25 Mm (Max)
Metravi DT-3690 Digital AC/DC Clamp Meter TRMS, 30mm Jaw Size, AC/DC Voltage, AC/DC Current up to 1000A
- Display: 6000 Counts LCD. T-RMS. Auto Power Off. Flame Sensor. Current measurement. Relative Measurement. Clamp Jaw Dia: 30mm.
- AC Voltage (T-RMS): 0 – 600mV / 6 / 60 / 600 / 750V. AC Accuracy: ±0.8%+5. DC Voltage: 0 -600mV / 6 / 60 / 600 / 1000V. DC Accuracy: ±0.5%+3.
- AC Current (T-RMS):0 – 60 / 600 / 1000A; Accuracy: ±2.0%+30. AC Current (from terminal): 0- 600u / 6000uA; Accuracy: ±0.8%+10. DC Current : 0 – 60 / 600 / 1000A; Accuracy: ±2.0%+30. DC Current (from terminal): 0- 600u / 6000uA; Accuracy: ±0.8%+10.
- Resistance, Temperature, Accuracy, Capacitance, Duty Cycle, Diode & Continuity Test
- To assure high accuracy and resolution, it uses an 8-bit microprocessor and a dual integral A/D convertor IC.
MEXTECH M266 3½ Digits 1000A AC Digital Clamp Meter 2000 Counts
- AC Current 200A/1000A(2 Ranges) / AC Voltage 750V(Auto Range)
- DC Voltage 1000V(Auto Range
- Resistance 200Ω/20kΩ(2 Ranges) ±1% / Continuity Yes
- Display: 3½ Digits with 1999 Counts. Data Hold Function all Ranges
- Low Battery Indication Overload protection Over Range Indication Power supply: 9Volt battery Clamp Jaw Opening : 51mm. Reading Rate: 3 Times/second
Metravi DT-115 Smart Digital Pocket TRMS AC Clamp Meter upto 600A AC, Auto Ranging & NCV
- AC Current 600A (NO DC CURRENT), Voltage AC (750V) / DC (1000V).
- Flashlight for accessing dark areas. Relative Measurement. Data Hold.
- 3 5/6 Digit, 6000 Count, Backlight LCD. T-RMS. Auto Ranging. NCV.
- Resistance: 0-600/6K/60K/600K/6M/40MΩ, Accuracy: ± (0.8%+3). Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF, Accuracy: ± (3.5%+20). Frequency: 0-10/100/1K/10K/100K/1M/10MHz, Accuracy: ± (0.1%+3). Temperature: -20°C to 1000°C, Accuracy: ± (1.0%+5). Diode & Continuity test.
- THIS IS NOT A DC CLAMP METER. PLEASE ORDER DT-725 FOR AC/DC.
Fluke 362, 200A AC/DC Clamp Meter (4345498)
- 200 A AC and DC current measurement
- Voltage: DC: 600 volts; AC: 600 volts; DC Accuracy: ± 1% + 5 digit; AC Accuracy: ± 1.5% + 5 digit
- Country of Origin: Malaysia
- 300 ohm resistance range with continuity check
- fluke india calibration certificate
Mass Pro MT87 Digital LCD Clamp Meter For Electricity Ampere Measurement Insulation Tester
- Digital LCD Clamp meter for electricity ampere measurement insulation tester
- Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests.
- Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go.
- This mt87 mini multimeter can measure ac/dc voltage, ac current and resistance. It can also indentify live-wire; it is an ideal tool for electrician's work. Diode test, continuity test, resistance measurements, transistor p-n junction test. Continuity test with buzzer sound while < 75 ohm.
- AC CURRENT RANGE: 10MA ~ 20A, 100MA ~ 200A, 1A ~ 400A. OVERLOAD PROTECTION: 400A ON ALL RANGES. AC VOLTAGE: RANGE 1V ~ 450V. OVERLOAD PROTECTION: 450V AC ON ALL RANGES. DC VOLTAGE: RANGE 1V ~ 600V. OVERLOAD PROTECTION: 600V DC / (PEAK AC) ON ALL RANGES.
SlideNBuy® DT-266 Ac Dc Digital Clamp Multimeter Auto Ranging Amp Current Voltage Measurement Device, Ammeter Tong Tester Meter with Accuracy (FDC-27A)
- Digital Clamp meter Common Function: 3 1/2 digits LCD, Max. reading 1999. Data-Hold Function. Low battery indication sensor. Plug-in insulation tester adapter 500VDC. (Dc Voltage Measures above 7 Volts)
- Autoranging clamp multimeter can be used to measure AC and DC Voltage, AC Current, Resistance, Diode test, Data Hold, Max Value Hold. troubleshoot electrical problems safely.
- If you have basic knowledge about multimeters you can try this small multimeter for basic continuity checks and voltage measurements and also can be used for heavy ampere measurement in heavy load wires
- The clamp multimeter will not be easily destroyed by overload test for overload protection, and the meter will auto power off after 10 mins’s no operation to save energy
- If you have basic knowledge about multimeters you can try this small multimeter for basic continuity checks and voltage measurements and also can be used for heavy ampere measurement in heavy load wires Salient features: AC 1000 Amp. Clamp Meter AC 750 Volt & DC 1000 Volt Resistance & Continuity Buzzer 2000 Count Display & Jaw Size 50 mm Data Hold & Manual Range Selection 1 X 9V. Battery
Conclusion Best Clamp Meter Brands
I hope you liked our collection of Best Clamp Meter Brands. If you like this article then share this with your